12v 3 Speeds 14cc Electric Air Conditioner Compressor
Car A/c Conditioning
USD $328.00
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Store CategoriesStore Categories12V 3 Speeds 14CC Electric Air conditioner Compressor Universal A/C Conditioning
🛠️This compressor can be mounted anywhere in your vehicle as there is no need for a belt or mechanical drive!
🛠️You can mount these compressors in an engine bay, a boot / trunk, under a tray of a ute / pickup or truck!
🛠️You need a decent alternator with an output of at least 100A and up to manage the 66 Amp current draw this compressor at its full speed rated at 4000rpm.
Specification：
Type
Vortex Type
Displacement 14 CC
High Voltage DC12V
Low Voltage
DC9-16V
Speed Range
2000-6000rpm
Maximum cooling capacity
2.4KW
Operating temperature range
-10~120℃
Storage temperature
-40~120℃
Energy efficiency ratio
2.2@Pd, Ps=1.5/0.3MP SH/SC=10/5℃
Volume efficiency
92%
Waterproof and dustproof level
IP67
Refrigerant
R134a (Not include)
Refrigeration oil
POE RL68H (Included)
Compressor Cooling
Inhalation refrigerant cooling
Weight
4.3kg
Motor type
Distributed
Motor type
Distributed
Pressure resistance Breaking pressure
6.5Mpa
Unloading valve
3.8±0.3Mpa
Withstand voltage
AC2000V,
Leakage current
<5mA
Air insulation
>500MΩ
Insulation refrigerant state
>20MΩ
Leakage
<7g/y
Maximum exhaust pressure
2.5Mpa
Motor type
Permanent magnet synchronous motor PMSM
Number of stator poles
9 slots
Number of rotor stages
6 poles
Stator winding method
distributed winding
System exhaust pressure protection
≤2.8Mpa
System moisture content
≤400ppm
Impurity content
≤25mg
Controller high voltage undervoltage and overvoltage within the range
Intake and exhaust port bolt installation
The tightening bolt of the intake and exhaust port is 14N.m
Installation precautions
The compressor body cannot be installed tilted
Package Included:
1 X Electric Compressor
Note:
very important
Compressor has to be mounted as in photos with the trough bolt mounting points at the underside of the compressor, this can not vary otherwise compressor will sustain damage or fail
Fittings
Discharge is #8
Suction is #10（Not include in the package）
Displacemant = 14cc
RPM / 3 Speeds = 2000rpm / 2nd speed 3500rpm / 3rd speed 5000rpm
Low displacement combined with high rpm = efficiency.
Controlling the compressor
Using the vehicles air conditioning thermostat located in the factory evaporator box / under dash unit to trigger a mini relay. (Not included but can be supplied separately)
Wiring diagram will be supplied either physically or by e-mail. Please contact us if necessary.
Powering the compressor
Parts required ( not included in the package )
1. 100A MIDI Fuse and holder
2. Continuous duty solenoid
3. 6 B&S Cable per metre depending on where you mount the compressor
4. Mini relay
Payment Policy
Normally,we will spot check whether the logistics is normal, and we guarantee that all orders have been sent out. If you have not received your goods for a long time, please contact us in time, we will be responsible for you to solve the problem.Returns PolicyReturn is accepted within 30 days after the buyer's receiving the item.
If you need return, let us know the detailed problem and send us some pictures for confirmation. Then get a address for return or refund .But we don't accept artificial damage of the items.
Manufacturer's limited Warranty for defective items.Contect UsIf you receive your item and find there is something wrong or missing, just don't worry. Feel free to contact us as we have professionals to help you solve it.
Copyright © 2023 Dianxiaomi
Product Description
Description🛠️This compressor can be mounted anywhere in your vehicle as there is no need for a belt or mechanical drive!
🛠️You can mount these compressors in an engine bay, a boot / trunk, under a tray of a ute / pickup or truck!
🛠️You need a decent alternator with an output of at least 100A and up to manage the 66 Amp current draw this compressor at its full speed rated at 4000rpm.
Specification：
Type
Vortex Type
Displacement 14 CC
High Voltage DC12V
Low Voltage
DC9-16V
Speed Range
2000-6000rpm
Maximum cooling capacity
2.4KW
Operating temperature range
-10~120℃
Storage temperature
-40~120℃
Energy efficiency ratio
2.2@Pd, Ps=1.5/0.3MP SH/SC=10/5℃
Volume efficiency
92%
Waterproof and dustproof level
IP67
Refrigerant
R134a (Not include)
Refrigeration oil
POE RL68H (Included)
Compressor Cooling
Inhalation refrigerant cooling
Weight
4.3kg
Motor type
Distributed
Motor type
Distributed
Pressure resistance Breaking pressure
6.5Mpa
Unloading valve
3.8±0.3Mpa
Withstand voltage
AC2000V,
Leakage current
<5mA
Air insulation
>500MΩ
Insulation refrigerant state
>20MΩ
Leakage
<7g/y
Maximum exhaust pressure
2.5Mpa
Motor type
Permanent magnet synchronous motor PMSM
Number of stator poles
9 slots
Number of rotor stages
6 poles
Stator winding method
distributed winding
System exhaust pressure protection
≤2.8Mpa
System moisture content
≤400ppm
Impurity content
≤25mg
Controller high voltage undervoltage and overvoltage within the range
Intake and exhaust port bolt installation
The tightening bolt of the intake and exhaust port is 14N.m
Installation precautions
The compressor body cannot be installed tilted
No heat source should appear within at least 30mm
around the compressor
After the compressor intake and exhaust
port sealing plug is removed, the sealing plug needs to be installed immediately
Package Included:
1 X Electric Compressor
Note:
very important
Compressor has to be mounted as in photos with the trough bolt mounting points at the underside of the compressor, this can not vary otherwise compressor will sustain damage or fail
Fittings
Discharge is #8
Suction is #10（Not include in the package）
Displacemant = 14cc
RPM / 3 Speeds = 2000rpm / 2nd speed 3500rpm / 3rd speed 5000rpm
Low displacement combined with high rpm = efficiency.
Controlling the compressor
Using the vehicles air conditioning thermostat located in the factory evaporator box / under dash unit to trigger a mini relay. (Not included but can be supplied separately)
Wiring diagram will be supplied either physically or by e-mail. Please contact us if necessary.
Powering the compressor
Parts required ( not included in the package )
1. 100A MIDI Fuse and holder
2. Continuous duty solenoid
3. 6 B&S Cable per metre depending on where you mount the compressor
4. Mini relay
Payment Policy
We accept PayPal only.
Payment must be cleared within 3 business days after placing the order
Normally,we will spot check whether the logistics is normal, and we guarantee that all orders have been sent out. If you have not received your goods for a long time, please contact us in time, we will be responsible for you to solve the problem.Returns PolicyReturn is accepted within 30 days after the buyer's receiving the item.
If you need return, let us know the detailed problem and send us some pictures for confirmation. Then get a address for return or refund .But we don't accept artificial damage of the items.
Manufacturer's limited Warranty for defective items.Contect UsIf you receive your item and find there is something wrong or missing, just don't worry. Feel free to contact us as we have professionals to help you solve it.
Copyright © 2023 Dianxiaomi
Price type
IN STOCK
OUT STOCK
.
